-
DeskPi PicoMate User Manual
Designed for Raspberry Pi Pico & Pico W V1.0
Table of contents
Revision history
Introduction
Key Features
What'...
-
How to check IR remote
Enable gpio-ir function by editing /boot/config.txt file.
dtoverlay=gpio-ir,gpio_pin=17
Install lirc software.
sudo ap...
-
How to check front USB port
First, you need to check if /boot/config.txt file contains this parameter:
dtoverlay=dwc2,dr_mode=host
The front USB f...
-
How to check SSD/HDD status
Check if the SSD/HDD has been recognized by OS, just check USB controller's status will be ok due to it is connected v...
-
How to check wifi connection status
Open a terminal and typing:
ifconfig -a
Wi-Fi adapter is called wlan0
How to check wifi signal level?
sud...
-
How to check OS Version
Open a terminal and typing:
lsb_release -a
Check the kernel version:
uname -a
-
How to Use IR function onboard.
You need to enable gpio-ir function by modify /boot/config.txt file. uncomment this line if not exsit please add i...
-
After initial Raspberry Pi Configuration and once you have Internet Connectivity established, Install the DeskPi Pro Utilities from https://github....
-
How to Uninstall Driver
DeskPi-uninstall
And then select the number against to your OS Type.
-
How to Install Deskpi driver
Flash the latest version of supported OS to your TF(microSD) card with etcher flash imaging tool
Insert TF(MicroSD) c...
-
Supported OS
Raspbian OS - 32bit version: 2020-08-12 Raspberry Pi OS.
Ubuntu-mate OS - 32bit version:20.04.1-desktop--armhf+raspi Ubuntu mate 20...
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
